4.Plug the cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the phone downward to secure it.
Wall Plate Studs | Keyhole Slots | ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Mounting Bracket
To mount the phone directly on a wall, in addition to the preceding steps, you need two screws (not supplied) with heads that fit into the keyhole slot on the bottom of the base.
1.Drill two holes 83mm apart (vertically). Then thread a screw into each hole, letting the heads extend about 5mm from the wall.
2.Substitute the long modular cord for the short cord.
%100'%6+0)"6*'"*#0&5'6
Plug one end of the supplied coiled cord into the handset’s modular jack. Then connect it to the jack on the left side of the telephone base.±
5'66+0)"72"6*'"2*10'
1.Press and hold both UP and DOWN for about four seconds until ;DJ;HýB7D=K7=; displays, then ;D=ý;IFý<H7 appear. ;D= flashes.
2.Press UP or DOWN to select the desired language, press DELETE to confirm. B9:ý9EDJH7IJ, ', (, ), * and + are displayed. ) flashes.
3.Press UP or DOWN to select the contrast level (from ' – +), press DELETE to confirm. ;DJ;Hý7H;7ý9E:;,
and UýUýU appears. The first U flashes.
±"016'"±"
Your local RadioShack store sells a variety of longer coiled handset cords, which are especially useful when you mount the phone on a wall.
5
