4.Press UP or DOWN to select the first digit of the area
code. Press DELETE to confirm the selection. The second U flashes.
5.Repeat steps 1 through 4 to set the second and the
third digit. Once you have confirmed the third digit of the area code, ;DJ;HýJ?C;ý:7J; appears, and the hour digit flashes.
6.Press UP or DOWN to select the desired hour. FC appears for a PM hour.
7.Press DELETE to confirm.
8.Repeat steps 6 and 7 to set the minutes, month and date.
5'66+0)"6*'"4+0)'4
TONE/PULSE
HANDSET VOL — Receiver Volume RINGER VOLUME
If you do not want to hear the phone ring, set RINGER to OFF. You can still make calls with the ringer off, and you can answer calls if you hear another phone on the same phone line ring. The NEW CALL indicator flashes when the phone rings, even when the ringer is off. If you want to hear the phone ring, set RINGER to HI or LO.
5'66+0)"6*'"&+#.+0)"/1&'
Set the TONE/PULSE switch on the side of the phone for the type of service you have. If you are not sure which type you have, do this simple test.
1.Set TONE/PULSE to TONE. Lift the handset and listen for a dial tone.
2.Press any number except 0. If your phone requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code number either.
•If the dial tone stops, you have
6
