Troubleshooting

 

Problem

 

 

 

Possible Cause

 

 

Action

See page

 

 

 

 

 

 

Sound output does not change

Touch response is turned off.

Press

the

TRANSPOSE/

E-78

when key pressure is varied.

 

 

FUNCTION button to turn it on.

 

Playing the keyboard sounds

Layer is turned on.

Press the LAYER button to turn off

E-74

two tones.

 

 

 

 

layering.

 

 

 

Different

tones sound

when

Split is turned on.

Press the SPLIT button to turn off

E-75

keys in

different

keyboard

 

 

split.

 

 

 

ranges are pressed.

 

 

 

 

 

 

 

 

 

The key or tuning does not

1.

The tuning or transpose

1.

Change the transpose or tuning

E-77, 78

match when playing along with

 

parameter is set to a value other

 

parameter value to 00.

 

another MIDI machine.

 

 

than 00.

 

 

 

 

 

 

 

 

 

2.

Mixer coarse tune, fine tune, and/

2.

Use the Mixer to change the

E-49

 

 

 

 

 

or octave shift settings are values

 

coarse tune, fine tune, and/or

 

 

 

 

 

 

other than 00.

 

octave shift settings to 00.

 

Parts suddenly drop out during

The number of tones being played

Use the Mixer to turn unneeded

E-47

song memory playback.

 

at the same time exceeds the

channels off and decrease the

 

 

 

 

 

keyboard’s limitation.

number of parts being played.

 

Some parts do not play at all

1.

Channels are turned off.

1.

Use the Mixer to turn channels

E-47

during song memory playback.

 

 

 

on.

 

 

 

 

 

 

 

2.

Volume setting is too low.

2.

Use the Mixer to check the

E-48

 

 

 

 

 

 

 

volume setting.

 

 

Nothing happens when the

1.

One or more of the melody

1.

Use the Mixer to turn on

E-47

LAYER or SPLIT button is

 

channels (2 through 4) is turned

 

Channels 2 through 4.

 

pressed.

 

 

 

 

off.

 

 

 

 

 

 

 

 

 

2.

The volume setting of one or

2.

Use the Mixer to raise the volume

E-48

 

 

 

 

 

more of the melody channels (2

 

setting of Channels 2 through 4.

 

 

 

 

 

 

through 4) is too low.

 

 

 

 

 

 

 

 

 

3.

The keyboard is in record

3.

The LAYER and SPLIT buttons

E-74, 75

 

 

 

 

 

standby.

 

are disabled during recording

 

 

 

 

 

 

 

 

and record standby.

 

 

 

 

 

4. The SMF Player Mode is currently

4.

Turn off the SMF Player Mode.

E-84

 

 

 

 

 

being use.

 

LAYER and SPLIT are not

 

 

 

 

 

 

 

 

available while the SMF Player

 

 

 

 

 

 

 

 

Mode is in use.

 

 

No sound is produced when

1.

MIDI cables are not connected

1.

Connect MIDI cables properly.

E-89

playing MIDI data from a

 

properly.

 

 

 

 

 

computer.

 

 

2.

Channel is turned off, or volume

2.

Use the Mixer to turn the channel

E-46, 47

 

 

 

 

 

setting is too low.

 

on, or raise the volume setting.

 

Playing

on the

keyboard

The computer’s MIDI Thru function

Turn off the MIDI Thru function on

E-82

produces an unnatural sound

is turned on.

the computer or turn off Local

 

when connected to a computer.

 

 

Control on the keyboard.

 

Cannot

record

 

chord

Accomp/Song MIDI Out is turned

Turn on Accomp/Song MIDI Out.

E-82

accompaniment data

on a

off.

 

 

 

 

 

computer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

735A-E-109A

E-107