Song Memory Function
SONG MEMORY
START/STOP
4Press the YES button.•This deletes all data from the location you specified and enters step record standby.
•Pressing the [] CURSOR button or the NO button cancels deleting the data.
Measure 120/Beat 1/Clock 0
(Step
Data flow |
|
|
|
|
|
|
| ||
• • • • • • • |
| All data to | ||
| the right | |||
|
| |||
|
| is deleted. | ||
|
|
|
|
|
NOTE
•When you reach the end of the recording by pressing the [] CURSOR button, the “REC” indicator appears and the “STEP” indicator flashes on the display, indicating that you can add more data using step recording.
To delete specific note data
1Perform steps 1 and 2 under “To correct mistakes while step recording” above to display the note you want to delete.
2Press the [] CURSOR button twice.
3In response to the “Delete?” message that appears on the screen, press the YES button to delete the displayed note.
CURSOR
YES/NO
SONG MEMORY TRACK
Editing Memory Contents
After you record to keyboard memory, you can recall individual notes and parameter settings (such as tone number) and make any changes you want. This means you can correct misplayed notes, make changes in tone selections, etc.
The following types of data can be edited.
•Note intensity
•Notes
•Chords
•Tone numbers
•Rhythm number
•INTRO/ENDING 1 button, INTRO/ENDING 2 button,
To edit memory contents
1Press the SONG MEMORY button three times to enter step recording standby, and then use the [+] and
Flash
S t e p R e c 
2Use the SONG MEMORY TRACK buttons to select the recorded track that you want to edit.
3Press the [] CURSOR button to enter the editing mode.•The REC indicator disappears from the display, and the STEP indicator flashes.