Radio Shack 42-4062, 735A-E-002A Selecting CHORUS, Changing the Settings of CHORUS Parameters, CHORUS Parameters, Use the [+] and, Press the [￿] CURSOR button, 3Press the [￿] CURSOR button

Applying Effects to Tones

EFFECT

Selecting CHORUS

Perform the following steps to select CHORUS.

1Press the EFFECT button, so the pointer appears next to EFFECT on the display screen.

2Press the [￿] CURSOR button twice.

• This displays the chorus editing screen.

3Press the [￿] CURSOR button.

•The chorus type setting screen will appear automatically about fives seconds after you press the button.

4Use the [+] and [–] buttons or the number buttons to scroll through the chorus types until the one you want is displayed, or use the number buttons to input the chorus number you want to select.

•See the list on page A-17 for information about the types of CHORUS effects that are available.

•Here you could also change the parameters of the effect you selected, if you want. See “Changing the Settings of CHORUS Parameters” for more information.

CURSOR

Number buttons

[+]/[–]

EXIT

Changing the Settings of CHORUS Parameters

You can control the relative strength of an effect and how it is applied. The parameters you can control depend on the effect. See the following section titled “CHORUS Parameters” for more information.

1After selecting the chorus type you want, use the [￿] and [￿] CURSOR buttons to display the

parameter whose setting you want to change.

• This displays the parameter setting screen.

2Use the [+] and [–] buttons or the number buttons to input the parameter setting you want.

3Press the EFFECT or EXIT button.

• This returns to the tone or rhythm selection screen.

CHORUS Parameters

■Chorus Level (Range: 000 to 127)

Specifies the size of the chorus sound.

■Chorus Rate (Range: 000 to 127)

Specifies the undulation speed of the chorus sound. A higher value produces faster undulation.

■Chorus Depth (Range: 000 to 127)

Specifies the undulation depth of the chorus sound. A higher value produces deeper undulation.

NOTE

•Whether or not an effect is applied to the parts that are sounding also depends on Mixer Mode Reverb Send, Chorus Send, and DSP on/off settings. See “Mixer Function” on page E-47 for more information.

E-36 735A-E-038A