Radio Shack 42-4062, 735A-E-002A Keyboard Settings, Using Layer, Parts, To layer tones, F r . H o r nG, S t, r i n g s, LAYER, 2 Press the LAYER button, 3 Select the layered tone

Keyboard Settings

SPLIT

LAYER

2 Press the LAYER button.

Parts

Up to four parts (numbered 1 through 4) can be used

Selected layer tone

Lit

simultaneously during keyboard play. These parts can be

used by the layer and split functions explained below.

S t

r i n g s 1

Part 1: Main tone part

Part 2: Layered tone part

Part 3: Split tone part

3 Select the layered tone.

Part 4: Layered and split tone part

Example: To select “360 FRENCH HORN GM” as the

Using Layer

layered tone, use the number buttons to in-

put 3, 6 and then 0.

Layer lets you assign two different tones (a main tone and a

F r . H o r nG

layered tone) to the keyboard, both of which play whenever

you press a key. For example, you could layer the FRENCH

HORN GM tone on the BRASS GM tone to produce a rich

and brassy sound.

4 Now try playing something on the keyboard.

LAYER

• Both tones are played at the same time.

5 Press the LAYER button again to unlayer the tones

and return the keyboard to normal.

NOTE

Main Tone (BRASS GM) + Layered Tone (FRENCH HORN GM)

• Turning on layering switches the currently selected part

from Part 1 to Part 2, and displays the layered tone. At

To layer tones

that time, you can use the [￿] and [￿] CURSOR buttons

to switch between parts. Turning off layering returns to

1 First select the main tone.

Part 1.

• The main tone sounds over Channel 1, while the layered

Example: To select “361 BRASS GM” as the main tone,

tone sounds over Channel 2. You can also use the Mixer

press the TONE button and then use the num-

to change the tone and volume settings for these

ber buttons to input 3, 6 and then 1.

channels.

• Note that layering is not possible during record standby

B r a s s _G

or recording in the Song Memory Mode, or while you

are using the SMF Player Mode.

E-74 735A-E-076A