Radio Shack 42-4062, 735A-E-002A A t k T i me, Creating a User Tone, Parameters and Their Settings, A t k T i me, R e l . T i me, V i b D e l a y, C - o f f F r q, R e s o n a n

Synthesizer Mode

SYNTH CURSOR

●WK-3000

MODULATION button lamp

[+]/[–]

Creating a User Tone	NOTE
Use the following procedure to select a preset tone and change	• See “Storing a User Tone In Memory” on page E-57 for
	details on saving user tone data to memory so it is not
its parameters to create a user tone.
	deleted.

1First, select the preset tone you want to use as a basis for your user tone.

2 Press the SYNTH button.				Parameters and Their Settings
				The following describes the function of each parameter and
	• This enters the Synth Mode, which is indicated by the
				provides its setting range.
		pointer next to SYNTH on the display screen.
		Parameter setting value		■ Attack Time (Range: –64 to 00 to +63)
			Currently selected parameter	Time it takes before the tone sounds after a key is pressed
			A t k T i me		A t k T i me
3 Use [￿] and [￿] CURSOR to display the parameter
				■ Release Time (Range: –64 to 00 to +63)
	whose setting you want to change.			Time the tone continues to sound after a key is released
			V i b D e l a y		R e l . T i me
	• Each press of [￿] or [￿] CURSOR changes to the next			■ Cutoff Frequency
		parameter. See “Parameters and Their Settings” on		(Range: –64 to 00 to +63)
		this page for information on setting range for each		High-band cutoff for the harmonic components of the tone
		parameter.
4 Use [+] and [–] to change the setting of the currently					C - o f f F r q
	selected parameter.
	• You can also use the number buttons to input a value			■ Resonance (Range: –64 to 00 to +63)
		to change a parameter setting. See “Parameters and
				Resonance of the tone
		Their Settings” on this page for information on setting
		range for each parameter.
5 After you are finished editing the sound, press the					R e s o n a n .
	SYNTH button to exit the Synthesizer Mode.

E-54 735A-E-056A