Radio Shack AM/FM Stereo Cassette owner manual Mounting The Stereo

12-2115a.fm Page 12 Wednesday, January 12, 2000 11:18 AM

MOUNTING THE STEREO

Once you verify that the stereo is con- nected properly, follow these steps to mount the stereo.

1.Disconnect the cable from the vehi- cle’s negative (–) battery terminal.

2.Disconnect the wiring harness and the antenna.

Vehicle’s

Antenna Wiring

Harness

3.Press REL on the right side of the control panel to remove it (see “Removing the Control Panel” on Page 15).

4.With the supplied keys’ tabs facing inward, insert both of the keys into the slots between the mounting sleeve and the stereo and press the keys toward the back of the stereo. The sleeve begins to slide off.

Sleeve

12

5.Remove the keys from the slots and slide the sleeve all the way off.

6.Put the sleeve into the opening in the dash, then secure it by bending out all the tabs with a screwdriver.

7.Pull the wiring harness and the antenna cable through the sleeve and dash, then reconnect the wiring harness and the antenna to the ste- reo.