Radio Shack AM/FM Stereo Cassette Selecting a Stored Station, Scanning Stored Stations

12-2115a.fm Page 20 Wednesday, January 12, 2000 11:18 AM

2.Hold down AMS (automatic memory scan) for about 3 seconds. The ste- reo scans the selected band and stores the first six stations it finds (starting with the currently tuned fre- quency).

The frequency, memory group, and memory location number appear for each station as it is stored. Then, after the stereo scans the band once, it tunes to the last stored station and begins to play.

3.To stop the stereo from searching for stations before it automatically stops, briefly press AMS.

Note: If a station has a weak signal or interference, the stereo might not store it automatically. If this hap- pens, you can manually store the station.

Selecting a Stored Station

To select a stored station, press BAND to select the correct memory group. Then briefly press the desired memory loca- tion button. (Do not hold down the mem- ory location button. This erases the previously stored station and stores the currently tuned station into that location.)

20

Scanning Stored Stations

The stereo’s automatic memory scan (AMS) feature scans all stored stations in a selected memory group, pausing for 5 seconds at each stored station.

1.Press BAND until the stereo displays the memory group you want to scan.

2.To start automatic memory scan, briefly press AMS. As each stored frequency plays, the current mem- ory location number flashes. (Do not hold down AMS. This causes the radio to automatically seek for and store six stations into the selected memory group.)

3.To stop scanning when the stereo pauses at a station, briefly press AMS. Otherwise, the stereo contin- ues to scan the memory group.