The supplied wiring harness with its 14- pin connector includes all the lead wires you need to connect the stereo to ground, power, some optional compo- nents, and speakers.
Important: Do not cut these wires. If you cut any wire, you cannot obtain a re- fund or exchange on this product. Ra- dioShack will provide warranty service if you cut a wire and find the product is de- fective.
You might need additional wire to com- plete the connections, depending on your individual auto sound system. Your local RadioShack store carries a full line of wire and wire management accesso- ries.
Cautions:
•You must connect the GROUND, +12V TO IGNITION, and +12V TO BATTERY wires first, then make all other connections as described in the fol- lowing sections before you plug the wiring harness into the stereo. If you do not make the connections in the order shown, an incorrect connection could damage the stereo.
•You must connect a separate wire to each speaker terminal as described in “Connecting Two Pairs of Speak- ers” on Page 9 or “Connecting One Pair of Speakers” on Page 10. Do not use a common wire or chassis ground for any speaker connection.
7
