BASIC OPERATION
SETTING THE CLOCK
Note: You can set the clock only when the vehicle’s ignition is turned on or set to ACC.
1. Hold down F/C (Frequency/Clock) until the hour digit(s) blink(s), then repeatedly press + or – until the correct hour appears.
2. Press F/C again. The minute digits blink. Repeat- edly press + or – until the correct minute appears.
3. Press F/C again to store the time.
ADJUSTING THE CONTROLS
When you listen to your stereo, you can adjust the following controls to suit your lis- tening preferences.
+/ – — Repeatedly press to increase (+) or decrease (– ) the volume. VOL: and the volume level appear (such as VOL:12). The volume level ranges from 0 to 40. The display automatically returns to the time display about 5 seconds after you finish ad- justing the sound.
Warning: To protect your hearing, do not listen at high volume levels. Slowly increase the volume to a comfortable listening level.
AUDIO — Repeatedly press until BAS, TRE, BAL, FAD, or VOL and the current level appear, then press + or – within 5 seconds to change the stereo’s bass, treble, bal- ance, or fader settings.
16