the handset also rings (unless you set the handset’s ringer to off).
TURNING AUTO TALK ON/ OFF
Your phone is preset so you must press TALK when you lift the handset from the base to answer a call. With auto talk turned on, you can answer a call by just lifting the hand- set from the base. If the handset is away from the base, you can answer by pressing any key.
Follow these steps to turn auto talk on or off.
1.Lift the handset and press MENU. A menu appears with 7kje JWba selected.
2.Press SELECT/INTCM to change the auto talk setting. Ed or E\\ appears indicating the selected setting.
3.Return the handset to the base or press MENU to store the new setting.
TURNING CALLER ID/CALL WAITING ON/OFF
If you subscribe to Call Waiting with Caller ID service, you can set the phone to show Call- er ID information for an incoming call even while you are using the phone.
Follow these steps to turn the Caller ID/Call Waiting feature on or off.
1.Lift the handset and press MENU. A menu appears with 7kje JWba selected.
2.Press 2 or VOL/CID 9 to select 9?:9M (Caller ID/Call Waiting).
3.Press SELECT/INTCM to change the Caller ID/Call Waiting setting. Ed, E\\, or Efj appears.
4.Press MENU then return the handset to the base to store the new setting.
With the Opt setting, you can use the ad- vanced Caller ID/Call Waiting options. See “Call Waiting Options Service” on Page 21.
STORING YOUR AREA CODE
You can store your local area code in the phone’s Caller ID record so it does not show the area code if the received call is from your local area. If for some reason you need to dial the area code (or store in the memory), you can add it afterwards. See “Adding/De- leting the Area Code” on Page 23.
Note: If your calling area requires
Follow these steps to store your area code.
1.Lift the handset and press MENU.
2.Press 3 or VOL/CID9 twice to select
7h[W 9eZ[.
3.Press SELECT/INTCM, then enter your
Note: If an area code is already stored, it appears on the display. To delete the area code, press DELETE/CH three
times. Then enter your area code. Or you can use 6REDIAL or FLASH7 to move the cursor and edit the area code.
4.Press SELECT/INTCM to store the area code, then press MENU or return the handset to the base to clear the display.
Installation | 13 |
