an error beep. Move closer to the base and try again.
USING MUTE
To talk to someone in the room while using the speakerphone without the person on the other end of the phone line hearing your con- versation, press MUTE/DELETE on the base. Ckj[ appears on the base's display.
Press MUTE/DELETE again to resume your phone conversation.
Note: When you talk over the speakerphone, the party that speaks first has priority. If you are making a call in a noisy environment, the phone might pick up the noise and assume you are still communicating, thus not switch- ing back to the person you are speaking with. If this should happen, press MUTE/DELETE so the noise will not be picked up by the phone's microphone. Press MUTE/DELETE or SPEAKER to release when it is your turn to speak.
SWITCHING BETWEEN THE HANDSET AND THE SPEAKERPHONE
To switch to the speakerphone while you are using the handset, press SPEAKER on the base. When you hear the conversation on the speakerphone, press TALK on the hand- set.
To switch to the handset while you are using the speakerphone, lift the handset off the base. If the handset is away from the base, press TALK, then press SPEAKER.
USING BOTH THE HANDSET AND THE SPEAKERPHONE
If someone else is using the speakerphone, press TALK on the handset to join the con- versation. If someone else is using the hand- set, press SPEAKER on the base to join the
conversation. 9ed\[h[dY[ appears on the base's display and CHARGE/IN USE lights.
During the call, one person can hang up and let the call continue at the other keypad. Or, both people can hang up to end the call.
Note: If you hear a
USING FLASH
Flash performs the electronic equivalent of a switchhook operation for special services, such as Call Waiting. For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the cur- rent call. Press FLASH again to return to the first call.
Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.
USING REDIAL
To quickly dial any of the last three numbers dialed on the handset, lift the handset and press REDIAL. The last number dialed on the handset appears below 2H[Z_Wbý'4. Press RE- DIAL repeatedly until the desired number ap- pears on the display, then press TALK.
To dial the last number dialed on the base, press REDIAL/PAUSE on the base. The last number dialed on the base appears on the base's display. Then press SPEAKER. You can redial only the last number dialed on the base.
Notes:
•The redial memory is separate for each keypad. You cannot redial a number you dialed on the handset keypad using REDIAL on the base, and vice versa.
Operation | 15 |
