Radio Shack CID-927 owner manual Preparation, Installing Batteries

43-927.fm Page 6 Thursday, June 24, 1999 9:36 AM

PREPARATION

INSTALLING BATTERIES

Your CID-927 requires four AAA batter- ies (not supplied) to store and display Caller ID records. For the best perfor- mance, we recommend alkaline batter- ies, available at your local RadioShack store.

Cautions:

•Use only fresh batteries of the required size and recommended type.

•Do not mix old and new batteries, different types of batteries (stan- dard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

Follow these steps to install batteries.

Note: When replacing the batteries, in- stall the new ones within 2 minutes, or the CID-927’s date and time will be lost. (The Caller ID information, however, stays stored in the CID-927’s memory.)

1.Use a Phillips screwdriver to remove the screw on the battery compart- ment cover.

2.Press in the tab on the battery com- partment cover and lift off the cover.

3.Put the batteries in the compartment as indicated by the polarity symbols (+ and –) marked inside.

4.Replace the cover and secure it with the screw.

Once you install the batteries, 12:00AM 1/01 appears.

The telephone company sends the cor- rect time with each incoming call, so the correct date and time are automatically set when the CID-927 receives its first call.

When flashes in the upper right corner of the display or the display dims, re- place batteries.

Cautions:

•Always remove old or weak batter- ies. Batteries can leak chemicals that can destroy electronic parts.

•Dispose of old batteries promptly and properly. Do not burn or bury them.

6