System Busy Message
In addition to the normal busy signal you hear when a num- ber you call is busy, your phone sounds tones and displays a message to indicate other situations when it cannot complete a call.
Tone | Display Shows | Description |
|
|
|
|
|
|
Fast Busy | SND to | The cellular system is |
| Redial | busy. |
|
|
|
High/low | SND to | The cellular system |
| Redial | could not complete the |
|
| call. |
|
|
|
When either of these conditions occur, you can press SND again to redial the number immediately (see “Using Automat- ic Redial” on Page 20), or press END then dial the number again.
ANSWERING A CALL
When the phone receives an incoming call, it rings or vibrates (depending on the alert setting — see “Changing the Alert Type” on Page 29) and Call flashes on the display. To an- swer the call, press SND. To end the call, press END.
Notes:
•Your phone can receive calls even if the antenna is not extended. For optimum performance or if the signal strength becomes weak, however, extend the antenna.
16