Your phone’s selectable system registration function lets you select one of six possible roaming modes:
Roaming Mode Description | Display |
|
|
|
|
Standard Mode — the phone first seeks a home type |
|
system, then it seeks a |
|
If you are using a type A | Std AB |
If you are using a type B (wireline) home system | Std BA |
|
|
Invert Preference Mode — the phone first seeks a non- |
|
home type system, then it seeks a home type. (Select |
|
this setting while on the fringe of your home area or in |
|
certain roaming situations.) |
|
If your home system is | ScanBA |
• Roam flashes rapidly — call on system B |
|
• Roam flashes slowly — call on home type system |
|
• InUse flashes slowly — call on home system |
|
If your home system is wireline (type B): | ScanAB |
• Roam flashes rapidly — call on system A |
|
• Roam flashes slowly — call on home type system |
|
• InUse flashes slowly — call on home system |
|
|
|
Home Only Mode — the phone will not operate outside | Home |
your home system. |
|
|
|
Scan A Mode — the phone will operate only within | Scan A |
| |
|
|
Scan B Mode — the phone will operate only within | Scan B |
wireline (B) systems. |
|
|
|
SID Mode — the phone automatically scans for one or | P Scan |
more preferred systems to use and one or more sys- |
|
tems not to use. System IDs must be preprogrammed |
|
by the dealer; preferred system (SID) feature requires |
|
special service (contact your cellular carrier). |
|
|
|
| 57 |