•To set your phone so you can answer a call by pressing
keys other than just 
SND, see “Using Multiple Key Answer” on Page 32.
•If you subscribe to calling line ID service through your cellular carrier, you can view the calling party’s phone number on the phone’s display. See “Viewing/Recalling Messages” on Page 51.
•If your phone receives a call but the signal strength is too weak to support it, Call appears as usual, but you hear the phone sound a series of beeps (rather than ringing or vibrating). The caller hears the standard “not in service” message. If this happens, press CLR to clear Call from the display.
Missed Call Message
If your phone is on and receives a call, but you do not answer it, Call appears on the display for about 15 seconds after the calling party hangs up. The next time you press any key (except CLR , END
, or PWR ), Call reappears for about 15
seconds to notify you that you missed a call.
To clear Call from the display, press CLR or END
.
17
