3.Plug the other end of the modular cord into the wall plate’s modular jack.
4.Align the bracket’s keyhole slots with the wall plate studs and slide the base downward to secure it on the wall plate.
Note: To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the phone and bracket.
Follow the steps under “On a Wall Plate or Wall” on Page 3, then follow these additional instructions for placement on a wall.
1.Drill two holes 315/16 inches (100 mm) apart. Then thread a screw into each hole, letting the head extend about 3/16 inches (5 mm) from the wall.
2.Align the bracket’s keyhole slots with the mounting screws and slide the bracket down to secure it.
CONNECTING THE
HANDSET CORD
1.Plug one end of the supplied coiled cord into the handset’s modular jack.
2.Plug the other end of the coiled cord into the handset jack on the left side of the phone nearest the handset cradle.
3.Place the handset on the cradle.
Note: Your local RadioShack store carries several different lengths and colors of phone cords that are especially useful when wall- mounting the phone.
SETTING THE RINGER VOLUME AND RING TYPE
Your phone comes with a preset ringer. However, you can choose from three differ- ent types of ring signal and set the ringer vol- ume to high, middle, low, or off. Follow these steps to set the ringer type and volume level:
1.Pick up the handset.
2.Press STORE/MUTE.
3.Press #.
Select and press a number
Digit | Ringer Type | Ringer Volume |
|
|
|
|
|
|
1 | Music | Low |
|
|
|
2 | Music | Middle |
|
|
|
3 | Music | High |
|
|
|
4 | Standard | Low |
|
|
|
5 | Standard | Middle |
|
|
|
6 | Standard | High |
|
|
|
7 | Quick | Low |
|
|
|
8 | Quick | Middle |
|
|
|
9 | Quick | High |
|
|
|
0 | No ring | Off |
|
|
|
4.Press STORE/MUTE.
5.Return the handset to the cradle.
Note: If you choose to turn the ringer off by selecting digit 0, the next time you pick up the receiver, the ringer will reset to the previ- ous setting.
SETTING THE DIALING MODE
Set TONE/PULSE for the type of service you have. If you are not sure which type you have, do this test.
4 | Preparation |
