meet these specifications could damage the system or the adapter.
•Always connect the AC adapter to the system before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the system.
Follow these steps to connect the AC adapter.
1.Insert the barrel plug of the supplied AC adapter into the
9VDC 300 mA jack.
2. Plug the other end of the adapter into a standard AC outlet.
The system beeps twice and the MESSAGE indicator lights, fol- lowed by 4 tones. The LOW BATT indicator blinks. After running a self test, the system sets all internal default values.
Notes:
•Do not press any of the answering system’s buttons while you are plugging the adapter into the AC outlet. If you acci-
10 | Installation |
