![](/images/new-backgrounds/1295107/29510719x1.webp)
ˆInstallation
MOUNTING THE SYSTEM
You can place the answering system’s base on a desk or table, or mount it on a standard wall plate or directly on a wall. Choose a lo- cation that is:
•near an AC outlet
•near a modular telephone line jack
•out of the way of normal activities
•away from electrical machinery, electri- cal appliances, metal walls or filing cabi- nets, wireless intercoms, alarms, and room monitors
•away from other cordless phones
The base’s location affects the phone’s range. If you have a choice of several loca- tions, try each to see which provides the best performance.
Note: The handset window has plastic film on it to protect it during shipment. Carefully peel off the film before using your phone.
Cautions:
You must use a Class 2 power
!source that supplies 9V DC and delivers at least 400 mA.
Its center tip must be set to positive and its plug must fit the system’s DC IN 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the system or the adapter.
•Always connect the AC adapter to the system before you connect it to AC power. When you finish, disconnect the adapter from AC power before you dis- connect it from the system.
Your system connects directly to a modular telephone line jack. If your telephone wiring does not have a modular jack, you can up- date the wiring yourself using jacks and adapters (available at your local RadioShack store), or have the telephone company up- date the wiring for you. You must use com- patible modular jacks that are compliant with Part 68 of FCC Rules.
Note: The USOC number of the jack to be installed is RJ11C (or RJ11W for a wall plate jack).
On a Desk
Follow these steps when you place the base on a desk or table.
1. Insert |
| the |
bracket’s | tabs | |
into the base’s | ||
upper | set | of |
tab slots. Press | ||
the | bracket’s | |
clips, | lower | |
them | into | the |
clip slots, then release the clips.
2.Plug one end of the supplied long modu- lar cord into the TEL LINE jack on the back of the base.
3.Plug the modular cord’s other end into a modular phone line jack.
4.Route the modular cord through the strain relief hook on the bracket.
5.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
10 | Installation |