Follow these steps to drop one of the calls.
1.Press FUNC.
2.Repeatedly press VOL/CID9to scroll down to :hef <_hij (or press 5) or :hef BWij (or press 6) to drop the desired call.
3.Press SELECT/CH. 9Wbb :heff[Z appears.
REVIEWING CALLER ID RECORDS
When the handset is faceup on the base, it shows the number of new Caller ID records, if any, and the total number of records.
To review the contents of each Caller ID record, lift the handset and press CID to re- call the number of records. Then, repeatedly press VOL/CID9 to scroll through the Caller ID records from the newest to the oldest, or VOL/CID8 to scroll forward through the records from the oldest to the newest. To scroll quickly through the records, hold down
VOL/CID 8 or 9.
When you scroll past the last record, the total number of records appears, then the first record. When you scroll past the first record, the total number of records appears, then the last record.
The top line of each record shows the date, the time, and the number of calls from that number. The second line shows the caller’s name and the third line shows the caller’s phone number.
To exit the Caller ID record display, press CID.
CALLER ID MESSAGES
Display | Description | |
|
| |
|
| |
D[m0ýNN | Shows the number of | |
JejWb0ýNN | new Caller ID records | |
(records you have not | ||
| ||
| reviewed) and the total | |
| number of records. | |
|
| |
Fh_lWj[ DWc[ | The caller has blocked | |
or | the Caller ID informa- | |
Fh_lWj[ DkcX[h | tion. | |
|
| |
Kdademd DWc[ | The caller is not within | |
or | a Caller ID service | |
KdademdýDkcX[h | area. | |
|
| |
?dYecfb[j[ :WjW | Appears if there was an | |
| error during transmis- | |
| sion of Caller ID infor- | |
| mation. Occasional | |
| errors are normal. If the | |
| phone frequently dis- | |
| plays ?dYecfb[j[ :WjW, | |
| contact your local | |
| phone company or | |
| RadioShack store. | |
|
|
ADDING/DELETING THE AREA CODE
When the area code of the received call is the same as the one you stored (see “Storing Your Area Code” on Page 15), the Caller ID record does not show the area code. If it is different, the record shows the area code.
However, you can add or delete the area code on the display. With the record dis- played, press 3 to add or delete the area code. Pressing 3 again deletes or adds the area code.
When you dial the number or store it into memory, the answering system dials or stores the number as it appears on the dis- play.
22 | Caller ID Operation |
