![](/images/new-backgrounds/1139404/13940429x1.webp)
•We recommend you not use REDIAL to dial numbers that include a tone entry. This could result in a wrong number being dialed. (See “Using Tone Services on a Pulse Line.”)
•The redial memory does not store a flash entry or any digits entered af- ter you press FLASH (see “Using Flash”).
3.When the service answers, press
. ✱ appears. Any additional num- bers you dial are sent as tone sig- nals.
4.After you complete the call, return the handset to the base or press TALK. The phone automatically re- sets to pulse dialing.
USING FLASH
FLASH performs the electronic equiva- lent of a switchhook operation for special services, such as Call Waiting.
For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.
Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.
USING TONE SERVICES ON A PULSE LINE
Some special services, such as
1.Be sure T/P is set to P.
2.Press TALK and dial the service’s main number.
USING PAGE
To page the person who has the handset or to locate the handset when the phone is not in use, press PAGE on the base. The handset beeps twice per second for 15 seconds and PAGING appears. The MESSAGE indicator flashes while the handset beeps.
PAGE
To stop the handset from beeping before it automatically stops, press any key on the handset or PAGE on the base.
Note: You cannot page the handset dur- ing a call.
MEMORY DIALING
You can store up to 20 phone numbers in memory, then dial a stored number by pressing a
15