OPERATION
MAKING AND RECEIVING CALLS
To make a call, lift the handset and press TALK. The TALK/BATT indicator on the handset and the CHARGE/IN USE indicator on the base light. When you hear a dial tone, dial the number.
indicator blinks, followed by a brief pause as your phone searches for a clear channel.
Note: If the handset is too far from the base, the channel might not be clear. Move closer to the base and try making the call again.
TALK
To answer a call, simply lift the handset. If the handset is away from the base, press any key.
To end a call, place the handset on the base or press TALK.
Note: If you press TALK to hang up and the phone does not disconnect, press TALK again while holding the handset closer to the base, or place the handset on the base.
SELECTING THE
CHANNEL
The phone scans 10 channels and auto- matically selects a clear channel each time you make or receive a call.
If you hear other conversation or exces- sive noise during a call, press CH to se- lect a different channel. The TALK/BATT
SETTING THE HANDSET VOLUME
You can choose one of four volume set- tings (low, medium, high, or maximum) for the handset. To change the volume, press VOL ▲ or ▼ during a call.
Note: When you press VOL ▲ while the volume is maximum or VOL ▼ while the volume is low, the setting does not change and the phone sounds an error tone.
USING REDIAL
You can quickly dial the last number di- aled. When you hear a dial tone, simply press REDIAL.
REDIAL
10
