If you have two separate
4.Route the adapter’s cord through the strain relief slot on the back of the phone.
3.Insert the supplied AC adapter’s barrel plug into the DC 9V jack on the back of the phone.
DC 9V
Caution: You must use a
!Class 2 power source that
supplies 9 volts DC and delivers at least 150 mA. Its center tip must be set to negative and its plug must fit the
6
Strain Relief Slot
5.Insert the bracket’s two small tabs into the matching slots at the upper left on the bottom of the phone, and snap the large tab of the bracket into the large slot at the upper right.
6.Connect the other end(s) of the phone cord(s) to the phone line jack(s).