PREPARATION
LINE STATUS
INDICATORS
The Line Status Indicators show you which line is in use or on hold. If a line is on hold, the indicator light flashes. If a line is in use, the indicator lights.
1.Press LINE 1 then lift the handset. The LINE 1 indicator should light steadily.
2.Press HOLD. The indicator should flash slowly.
3.If the indicator worked correctly, it does not need adjustment. Other- wise, proceed to Step 4.
4.Slide the phone’s name and number index card and plastic cover out of its slot and remove it. Locate the L1 control.
Indicator is: | Line is: |
|
|
|
|
Off | Not in use |
|
|
On Steadily | In use |
|
|
Flashing rapidly | Ringing |
|
|
Flashing slowly | On hold |
|
|
Adjusting the Line Status Indicators
Each line status indicator is preset to work correctly with most telephone lines. However, if an indicator does not light when its line is in use, you may need to adjust the indicator to ensure correct op- eration.
Follow these steps to test and adjust the Line Status Indicators.
5.Press HOLD and insert the supplied
6.Press LINE 1. If the indicator flashes slowly, turn the L1 control until the indicator lights steadily.
7.Press HOLD again and repeat Steps 4 and 5 until the indicator works cor- rectly with the line on and off hold.
Repeat these steps to adjust L2.
10
