43-1031.fm Page 8 Tuesday, August 17, 1999 9:24 AM
2.Plug one end of the supplied mod- ular cord into the TEL. LINE jack on the back of the base.
3.On the bottom of the base, route the modular cord downward and under the slot’s clips as shown.
4.Attach the supplied bracket to the bottom of the base by inserting the tabs on the bracket into the slots on the base, then sliding the bracket up.
5.Insert the supplied AC adapter’s barrel plug into the 12VDC jack on the back of the base. Then plug the adapter into a standard AC outlet.
6.Plug the modular cord into a mod- ular phone line jack.
7.Align the keyhole slots with the mounting screws and slide the base downward to secure it.
8.Carefully place the handset in the cradle at the top of the base and make sure it is secure.
Note: If you later want to mount the base on a desktop, press PUSH on the bracket and pull it off to remove it from the base’s bot- tom.
9.Fully extend the base’s antenna and place it in a vertical position.
8
