Radio Shack ET-532 owner manual Operation, MAKING/ANSWERING a Call, Using the Handset At the Base

43-1032.fm Page 9 Tuesday, August 17, 1999 9:41 AM

OPERATION

Your ET-532’s LCD display shows telephone numbers as you dial them or when you recall them from memory. It shows the current channel number and lets you know when battery power is growing weak or the phone is out of range of the base. The display also shows indicators when you pres FLASH or PAUSE, or when you switch from tone to pulse dialing.

MAKING/ANSWERING A CALL

You can use your cordless telephone in two ways: at the base or away from the base.

To make a call, lift the handset from the base and press TALK so the key- pad and the CHARGE/TALK indicator on the base light.

Note: CH and the currently used channel number appear on the display. This number might change when you return the handset to the base.

To disconnect a call, replace the hand- set on the base.

Using the Handset

at the Base

You can use the handset at the base like a regular corded telephone. Just set POWER to ON and place the hand- set in the cradle.

To answer a call, just lift the handset from the base.

Using the Handset

Away from the Base

To make or answer a call, set POWER to ON and press TALK. The keypad and CHARGE/TALK indicator light.

To disconnect a call, press TALK so the keypad light and the CHARGE/ TALK indicator turn off.

Notes:

•CH and the currently used channel number appear on the display.

•To conserve battery power, you can turn off the handset’s power when you are not making or answering a call.

9