Radio Shack ET-652 Entering a Pause, Dialing a Memory Number, Chain-Dialing Service Numbers

43-652.fm Page 14 Friday, August 13, 1999 11:00 AM

7.When you finish storing numbers in memory, set NORM/STORE to

NORM.

For each stored number, write the name of the person or company on the memo- ry index. Use a paper clip to lift off the in- dex’s plastic cover. Replace the cover.

MODE	-	STORE
NORM

				2	-	TONE
				- LINE	PULSE
			R	HI
		RINGE		LO
	1-		OFF
LINE	LO HI
OFF

VOLUME MAX

MIN

To replace a stored number, just store a new one in its place.

Entering a Pause

In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect.

14

To enter a 4-second pause while storing a phone number, press PAUSE. You can add more pause entries for a longer pause.

MODE	-	STORE
NORM

2	-	TONE
- LINE	PULSE

		RINGER		HI
				LO
	1-		OFF
LINE	LO HI
OFF

VOLUME MAX

MIN

Dialing a Memory Number

1.Press LINE 1 or LINE 2.

2.Lift the handset or press SPEAKER.

3.Press MEMORY.

4.Enter the memory location number (01–20) for the telephone number you want to dial.

Chain-Dialing Service Numbers

For quick recall of numbers for special services, store each group of numbers in its own memory location.

When calling special services (such as alternate long distance or bank-by- phone), dial the service’s main number first. Then, at the appropriate place in the call, press MEMORY and enter the number for the location where the addi- tional information is stored.

Note: You cannot store if you have pulse dialing.