SETTING THE DIALING MODE
Set MODE on the side of the phone for the type of service you have. If you are not sure which type you have, do this test.
Line 1
|
|
|
|
| MODE | - STORE |
|
|
|
|
| NORM |
|
|
|
| 2 | - | TONE |
|
|
| R - | LINE | PULSE |
|
|
|
| 1- RINGEOFF | LO HI |
|
|
|
|
|
|
|
|
| |
| LINE | LO HI |
|
|
|
|
| OFF |
|
|
|
|
|
VOLUME | MAX |
|
|
|
|
|
|
| MODE | ||||
MIN |
|
| ||||
1.Set MODE to TONE.
2.Press Line 1.
3.Lift the handset and listen for a dial tone.
4.Press any number other than 0.
Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code number either.
If the dial tone stops, you have
5.Hang up, then repeat the test for Line 2.
6.If you have pulse service on either line, set MODE to PULSE. If you have tone service on both lines, leave the switch to TONE.
8
SETTING THE RINGER VOLUME
Each line on the
To change the ringer volume, set RING- ER for the desired line to OFF, LO, or HI. With the ringer off, you can still answer calls if you hear an extension phone ring or see one of the
MODE | - STORE |
NORM |
|
2 | - | TONE |
- LINE | PULSE |
|
|
| RINGER | LO HI | |
| 1- |
| OFF |
|
LINE | LO HI |
|
| |
OFF |
|
|
|
|
VOLUME | MAX |
|
MIN
SETTING THE NORM/ STORE SWITCH
The NORM/STORE switch is used to store memory numbers (see “Memory Dialing” on Page 13). Set it to NORM for normal operation.
MODE | - STORE |
NORM |
|
2 | - | TONE |
| ||
- LINE | PULSE |
|
|
| RINGER | LO HI | |
| 1- |
| OFF |
|
LINE | LO HI |
|
| |
OFF |
|
|
|
|
VOLUME | MAX |
|
MIN
