Radio Shack ET-908 owner manual Mounting the Base on a Wall, Mounting on a Wall Plate

43-1083.fm Page 7 Tuesday, August 17, 1999 2:17 PM

MOUNTING THE BASE ON A WALL

Using the supplied mounting bracket, you can mount the ET-908’s base on a phone jack wall plate or directly on the wall.

To prepare the bracket for mounting, twist off the tabs attached to the center of the bracket and press them securely into the holes on the narrow end of the bracket.

2.Plug one end of the supplied short modular cord into the TO TEL LINE jack, then press the cord under the other recessed clip on the bot- tom of the phone.

TO TEL. LINE

3.Insert the tabs on the supplied mounting bracket into the slots on the bottom of the base. Then press the bracket down until it snaps into place.

Mounting on a Wall Plate

1. Press the ET-908’s AC cord under the recessed clip directly below it on the bottom of the phone.

7