19 
USE OF PAD NUMBERS
1.In the state of VCD disc playing, press PBC button on the IR remote controller to turn PBC function ON/OFF:
1).When it is in the state of PBC ON and display the title menu on the TV screen if the disc include TITLE MENU, press one of NUMBER buttons
to select the track/chapter to playback; During playing, the NUMBER buttons are not available.
2).When it is in the state of PBC OFF, press one of the NUMBER buttons to select the chapter/track to playback.
2.In the state of DVD disc playing, press TITLE button to display the title menu; then press the NUMBER button to select the chapter/ track to playback.
3.In the state of CD/MP3 disc playing, press the NUMBER button to select the chapter/track to playback.
*+10 BUTTON: Press it once to display
*The
VIEW IN DIFFERENT ANGLE
1.In the state of VCD/MP3/CD disc playing, the ANGLE button on the IR remote controller is not available.
2.In the state of DVD disc playing, press TITLE button on the IR remote controller to display TITLE MENU on TV screen, then select ANGLE FUNCTION item and then press ENTER button on the IR remote controller to turn into ANGLE function playing mode, then press the ANGLE button repeatedly on the IR remote controller to view in different angle.(depend on the disc used)
12 
RADIO OPERATION
1. PRESET STATION [ 1-6 ] BUTTONS
A]. To memorize the current frequency, press any one of the six preset
B]. To recall the preset memory, press one of the preset buttons
2.AS/PS BUTTON
When shortly pressing the APS button on the front panel or the A/P button on the remote controller, the radio searches for each preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for few seconds with releasing mute, and then searches again. In FM band, FM 1,FM 2 and FM 3 is checked one at a time.
When long pressing the APS or A/P button (more than 1 second), the radio searches from the current frequency and checks the signal strength level until 1 cycle search is finished. And then 6 strongest stations are preset to the corresponding preset number. The AS operation is implemented in the each band of selected band. When the AS operation is finished, the radio executes the preset scan.
3.LOC BUTTON(effect only for FM)
If you find that the signal is weak and the listening effect is bad when tuning for the distance station, check whether the word LOC is displayed on LCD. If the word LOC is displayed on LCD, press the LOC button on the front panel or the remote controller to turn off LOC function, then tune for distance radio station again.
If you find that the signal is so strong that the interfere is stronger when tuning for the local station, check whether the word LOC is displayed on LCD. If the word LOC is displayed on LCD, press the LOC button to turn on LOC function, then tune for local radio station again.
4.BAND and PAL/NTSC BUTTON
In RADIO mode, press it repeatedly on the remote controller or the BND button on the front controller to select your desired radio band and word which band is selected will be displayed on LCD.
In DISC mode, press it repeatedly to select PAL or NTSC mode.
5.TUNE/SEEK UP/DOWN BUTTONS
Press UP or DN button on the remote controller or ^ or v button on the front panel to manually tune up or down for your desired station. Press them hold for more than 2 seconds to automatically tune up or down for the stronger station.
6.STEREO/MONO BUTTON
Press the ST button on the remote controller to select STEREO or MONO sound mode.
