20-430.fm Page 4 Wednesday, August 4, 1999 1:29 PM

Your PRO-2050 scanner can receive all of these bands:

Frequency

Types of

Range

Transmissions

 

 

 

 

29–29.7 MHz

10-Meter Amateur

 

Radio

 

 

29.7–50 MHz

VHF Lo

 

 

50–54 MHz

6-Meter Ham Band

 

 

108–136.975

Aircraft

MHz

 

 

 

137–144 MHz

Military Land Mobile

 

 

144–148 MHz

2-Meter Ham Band

 

 

148–174 MHz

VHF Hi

 

 

406–420 MHz

Federal

 

Government

 

 

420–450 MHz

70-cm Ham Band

 

 

450–470 MHz

UHF Standard Band

 

 

470–512 MHz

UHF “T” Band

 

 

806–824 MHz

Public Service “800”

851–869 MHz

except

896–956 MHz

Cellular Band

 

 

Note: See “Specifications” on Page 51 for more information about the scan- ner’s frequency steps.

4

FCC NOTICE

Your scanner might cause TV or radio interference even when it is operating properly. To determine if your scanner is causing the interference, turn off your scanner. If the interference goes away, your scanner is causing it. Try to eliminate the interference by:

Moving your scanner away from the receiver

Connecting your scanner to an outlet that is on a different electri- cal circuit from the receiver

Contacting your local Ra- dioShack store for help

If you cannot eliminate the interfer- ence, the FCC requires that you stop using your scanner.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.

We recommend you record your scan- ner’s serial number here. The number is on the scanner’s back panel.

Serial Number _________________

Page 4
Image 4
Radio Shack owner manual FCC Notice, Your PRO-2050 scanner can receive all of these bands