To select another service bank, re- peatedly press SVC until the scanner displays the name of the bank you want to use.
Notes:
•To skip data signals (such as modem signals), press DATA. See “Skipping Data Signals” on Page 23.
•Because frequencies are not always assigned to the same ser- vices everywhere, you might hear transmissions from one service in another service group.
Press SEARCH to start searching im- mediately or to continue searching if you want to skip a frequency.
During
Follow these steps to store frequen- cies into channels.
1.Press MANUAL.
2.Use the number keys to enter the channel number
3.Press SVC then SEARCH to select a service bank and begin searching.
4.When the scanner stops on a transmission, press HOLD. The frequency appears.
5.Press E to store the frequency into the channel.
LIMIT SEARCH
If you do not know a frequency to store, you can search for transmis- sions within a range of frequencies you select, called the limit search range. Then you can store any inter- esting frequencies you find into chan- nels.
1.Press MANUAL, enter the chan- nel number where you want to store a frequency, then press MANUAL again. The channel num- ber appears.
2.Use the number keys and • to enter the frequency that is the lower limit of the range you want to search.
3.Press LIMIT.
4.Use the number keys and • to enter the frequency that is the upper limit of the range you want to search.
5.Press LIMIT, then press SEARCH. The scanner begins to search from the lower limit to the upper limit.
6.When the scanner stops on a transmission, quickly press either:
• E to store the displayed fre-
19
