PROBLEM | POSSIBLE CAUSE | REMEDY |
Scanner will not track a | The data frequency is | Find the data frequency | |
trunked system. | missing. | (see “Programming | |
PROBLEM | POSSIBLE CAUSE | REMEDY | |
(continued) |
| Trunked Frequencies” on | |
|
|
|
|
| The system you are try- | Page 26). | |
| Set the scanner to | ||
| ing to track is a Type I | receive Type I trunked | |
| system, and the scanner | frequencies. See “Scan- | |
| is set to scan Type II sys- | ning Type I and Hybrid | |
| tems. | Trunked Systems” on | |
|
| Page 33. | |
|
|
| |
Scanner will not stop | No IDs have been | Store one or more IDs | |
while scanning a scan | stored. | (see “Scan Lists” on | |
list. |
| Page 31). | |
|
|
| |
| The IDs you have stored | Scan another transmis- | |
| are not active. | sion. | |
|
|
| |
Scanner will not acquire | SQUELCH is not cor- | Adjust squelch for trunk | |
a data channel. | rectly adjusted for trunk | tracking. See “Setting | |
| tracking. | Squelch for the Trunk | |
|
| Tracking Mode” on | |
|
| Page 26. | |
|
|
| |
| The frequency used for | Add the frequency used | |
| the data channel is miss- | for the data channel to | |
| ing. | the frequency list. (see | |
|
| “Programming Trunked | |
|
| Frequencies” on | |
|
| Page 26). | |
|
|
| |
Missing replies to con- | The system you are try- | Set the scanner to | |
versations. | ing to track is a Type I | receive Type I trunked | |
| system, and the scanner | frequencies. See “Scan- | |
| is set to scan Type II sys- | ning Type I and Hybrid | |
| tems. | Trunked Systems” on | |
|
| Page 33. | |
47
