2.Select the bank you want to store the trunked system’s frequencies in by pressing a number key. The scanner automatically selects the first channel in the bank.
3.Use the number keys to enter the trunked system’s frequencies, then press E.
4.Note: If you entered an invalid fre- quency in Step 3, the scanner beeps, the channel number flashes and Error appears. If this happens, press CLEAR to clear the frequency, then repeat Step 3.
5.Press either MANUAL or s to select the next channel in the bank.
6.Repeat Steps 3 and 4 until all fre- quencies have been entered.
SCANNING A TRUNKED BANK
You can scan one trunked bank at a time. Once you have stored frequen- cies for a trunked system in one or more of the 10 available banks and you are scanning
1.Press TRUNK. The indicators for all banks flash.
2.Use the number keys to enter the number for the trunked bank you want to scan, then press SEARCH to begin searching for the trunk’s data channel (the channel that controls the trunk). SEARCH flashes as the scanner searches for a data channel. When the scanner finds it, it begins trunk tracking.
If you entered all of the trunk’s fre- quencies, you should be able to follow conversations between broadcasters even when they change frequencies. IDs, which represent different service groups, appear.
27
