MOVING A FREQUENCY FROM THE MONITOR MEMORY TO A CHANNEL
1.Press MANUAL, enter the channel number where you want to store the frequency, then press PGM. PGM, the frequency number or 000.0000, and the selected channel number appear.
2.Press MON. MON and the frequency appear and the channel number flashes.
3.Press E. MON disappears, the channel number stops flashing, and the scanner stores the frequency in the selected channel.
MONITORING A STORED CHANNEL
You can continuously monitor a specific channel without scanning. This is useful if you hear an emergency broad- cast on a channel and do not want to miss any details — even though there might be periods of silence — or if you simply want to monitor that channel.
Follow these steps to manually select a channel.
1. Press MANUAL.
2.Enter the channel number.
3.Press MANUAL again.
32