RESETTING/INITIALIZING THE SCANNER
If the scanner’s display locks up or does not work properly after you connect a power source, you might need to reset or initialize it.
Important: If you have problems, first try to reset the scanner. If that does not work, you can initialize the scan- ner; however, initializing clears all frequencies you stored in the scanner’s memory and initializes the scanner to its default settings.
Resetting the Scanner
1.Turn off the scanner, then turn it on again.
2.Insert a pointed object, such as a straightened paper clip, into the reset hole on the side of the scanner. Then gently press and release the reset button inside the opening. The display goes blank, then information reappears.
50