32-3001.fm Page 4 Tuesday, August 10, 1999 8:02 AM

PREPARATION

CONNECTING THE

OUTPUTS

Connect your amplifier and a cassette recorder to the audio output jacks on the back of the mixer.

(illus - show the left and right out- put jacks.)

1.Connect the amplifier’s left and right input jacks to the mixer’s MAIN OUT output jacks to play the mixer’s sound.

2.Connect the tape recorder’s left and right input jacks to the mixer’s TAPE OUT output jacks to record the mixer’s sound.

CONNECTING INPUTS AND PRESETTING LEVELS

Connect your audio sources (AM/FM tuners, CD players, cassette decks, or phonograph players) to the audio in- put jacks on the back of the mixer.

1.Connect the AC power cord to a standard AC outlet.

2.Before turning on the power:

Set MIC, PHONO 1, PHONO 2, LINE 1, and LINE 2 to 0.

Set NORMAL/STANDBY/TALK- OVER to STANDBY.

Set MONITOR LEVEL fully coun- terclockwise to minimum.

Set EQUALIZER BYPASS/ON to

BYPASS.

(illus)

3.Set POWER OFF/ON to ON to turn on the mixer’s power. The VU meters and the power indicator lights.

4.Connect a high-quality micro- phone with a 1/4-inch plug to the MIC terminal.

Note: This is the remote (guest) microphone.

5.Set MIC main volume control to 5.

(illus - show the left and right input jacks.)

4

Page 4
Image 4
Radio Shack SM-1000, 32-3001 owner manual Preparation, Connecting Outputs, Connecting Inputs and Presetting Levels