Radio Shack TAD-1009 owner manual Recording the Memory Full Announcement

43-781.fm Page 11 Monday, August 16, 1999 7:41 AM

Recording the Memory Full Announcement

The TAD has a built-in memory full an- nouncement. When the memory be- comes full and the TAD can no longer record messages, the ON LINE, PLAY, and MEMO indicators flash, and the TAD announces to the caller “The memory is full.”

Follow these steps if you want to record your own memory full an- nouncement (up to 1 minute in length).

1.Press and hold 4/OGM2 until the TAD beeps and the ON LINE indi- cator flashes.

Checking/Deleting the Memory Full Announcement

You can press 4/OGM2 at any time to play the memory full announcement. Adjust VOLUME on the side of the TAD to a comfortable listening level.

To stop listening to the memory full an- nouncement before it ends, press ON/ OFF.

To delete your recorded memory full announcement, press PGM/DEL while the TAD is playing it. The TAD beeps twice and is then set to use its built-in announcement.

illustration

2.Speak into the TAD in a strong voice from about 12 inches away.

3.Press ON/OFF when you finish recording the announcement. The TAD plays the current memory full announcement.

11