43-781.fm Page 6 Monday, August 16, 1999 7:41 AM

INSTALLATION

Select a location for the TAD that is near a telephone jack and an AC outlet and is not in the way of normal activi- ties.

CONNECTING TO THE TELEPHONE LINE

illustration

1.Unplug the telephone’s modular cord from the modular phone line jack and plug it into the TO TEL jack on the back of the TAD.

2.Plug one end of the supplied mod- ular cord into the TO LINE jack on the back of the TAD.

3.Plug the cord’s other end into a modular phone line jack.

Note: If the phone line jack is not a modular jack, you must update the wir- ing. You can convert the wiring your- self, using jacks and adapters available at your local Radio Shack store. Or, you can let the phone com- pany update the wiring for you.

The phone company will charge you for the installation of neces- sary jacks.

The USOC number of the jack to be installed is RJ11C.

CONNECTING

THE AC ADAPTER

Caution: You must use a Class II AC adapter that supplies 12 volts of pow- er, delivers at least 200 milliamps, and has a plug that properly fits the TAD’s 12V DC jack with its center tip set to negative. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the adapter and the TAD.

illustration

1.Insert the small round plug of the supplied AC adapter into the 12V DC jack on the back of the TAD.

2.Plug the other end of the AC adapter into a standard AC outlet.

The TAD initializes itself and the ON LINE, MEMO, and PLAY indicators flash six times. Then the TAD beeps once and the ON LINE indicator lights steadily.

illustration

6

Page 6
Image 6
Radio Shack TAD-1009 owner manual Installation, Connecting AC Adapter