PREPARATION
SETTING THE DAY
AND TIME
The TAD records the day and time of the call with each phone message. Follow these steps to set the current day and time.
Notes:
•To avoid having to reset the time if AC power is lost, we recommend you install a backup battery before you set the day and time.
•If you do not complete each step within 8 seconds, the TAD stops setting and announces the day and time. Start again from Step 1.
1.Hold down STOP/TIME SET until the TAD announces, “Sunday.” CL (clock) then 01 appears on the dis- play.
Note: Adjust VOLUME on the right side of the TAD to the desired lis- tening level.
VOLUME
2.To change the day of the week, re- peatedly press MEMO/REPEAT to move backward or CODE/SKIP to move forward until the TAD an- nounces the desired day of the week.
3.Press STOP/TIME SET. The TAD an- nounces the preset hour.
4.To change the hour, repeatedly press MEMO/REPEAT to move back- ward or CODE/SKIP to move forward to the desired hour.
5.Press STOP/TIME SET. The TAD an- nounces the preset minute.
6.To change the minutes, hold down MEMO/REPEAT to move backward or CODE/SKIP to move forward to the desired minute.
7.Press STOP/TIME SET to confirm the settings. The TAD announces the day and time and CL disappears.
To check the current day/time at any time, press STOP/TIME SET.
8
