CONNECTING POWER
1.Plug the supplied AC adapter into a standard AC out- let.
2.Rotate VOLUME counterclockwise until it clicks to turn on the TAD-716.
The message indicator turns on while the TAD-716 checks for an outgoing message.
If an outgoing message is already recorded, the TAD-716 automatically plays it back. If there is no outgoing mes- sage, the TAD-716 sounds a beep every 5 seconds until you record a message (see “Recording the Outgoing Message” on Page 10).
Note: If the cassette tape is broken or is not inserted properly, the TAD-716 sounds a continuous low tone when it is connected to power. To stop the tone, unplug the adapter from the AC outlet. Reinsert or replace the tape, then plug the adapter back into the AC outlet.
9
