Radio Shack TAD-716 owner manual Recording the Outgoing Message

RECORDING THE OUTGOING MESSAGE

Before you can use the TAD-716, you must record the outgoing message. The maximum length for your outgo- ing message is 60 seconds.

Hint: To help protect your home or office, do not tell call- ers you are away. Instead, say you cannot come to the phone at this time.

Follow these steps to record an outgoing message.

1.If the TAD-716 is off, rotate VOLUME counterclock- wise until it clicks to turn it on. The message indicator turns on.

Note: If the new message indicator is flashing, press PLAY to play all messages before you record a new announcement. Recording an outgoing message erases any stored messages.

2.Lift open the cassette compartment door.

3. Hold down OGM REC. When the message indicator begins flash- ing, speak clearly towards the built-in microphone.

10