20
3. To enter the name, use the dialing
buttons. The character chart below
shows you which dialing buttons
control each character. Repeatedly
press a dialing button until the char-
acter you want appears on the dis-
play.
Press to select lowercase letters,
and press to select uppercase
letters.
Press to move the cursor to the
left. (If you make a mistake, move
the cursor over the error, then press
DELETE and enter the correct char-
acter.)
Press # to move the cursor to the
right and enter the next character.
4. When you finish entering all charac-
ters, press DIRECTORY.
5. Enter the phone number and any
tone or pause entries (see “Using
Tone Services on a Pulse Line” on
Page 18 and “Entering a Pause” on
Page 21).
6. Press DIRECTORY. The phone
beeps and Saved directory
appears.
7. Repeat Steps 2–6 to store other
names and numbers.
Note: If 30 numbers have already been
stored, the display shows Directory
full when you hold down DIRECTORY
in Step 1.
Dialing a Stored Number 1. Press DIRECTORY.
2. Press or to scroll through the
directory. To find a name quickly
using its first letter, press the num-
ber key that corresponds with the
letter. For example, to find a name
starting with D, press 3 once. The
display shows the first listing of the
names starting with D. To find a
name starting with E, press 3 twice.
3. Press TALK. The number on the dis-
play is automatically dialed.
Editing an Entry 1. Press DIRECTORY.
2. Press or to display the number
you want to edit.
3. Press EDIT/REDIAL/P.
4. Edit the record as described in
Steps 3–6 of “Storing a Name and
Number” on Page19.
43-728.fm Page 20 Thursday, August 26, 1999 8:53 AM