21

Deleting an Entry

1. Press DIRECTORY.
2. Press or to display the number
you want to delete.
3. Press DELETE. The display shows
Delete? DELETE=OK prompting
you to confirm the deletion.
4. If this is the entry you want to delete,
press DELETE again. The TAD
beeps indicating that the entry was
deleted from the directory.

Entering a Pause

In some telephone systems, you must
dial an access code (9, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
a pause after the access code to allow
the outside line time to connect. To en-
ter a 2-second pause, press EDIT/REDI-
AL on the handset at each point where a
pause is needed. The display shows .
For a longer pause, press EDIT/REDIAL
additional times.

Testing Stored Emergency

Numbers

If you store an emergency service's
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.
USING A HEADSET
You can make or answer calls with
hands-free convenience using an op-
tional headset that has a 3/32-inch (2.5
mm) plug. Contact your local Ra-
dioShack store for a suitable headset.
Insert the headset plug into the jack
on the side of the handset.
Notes:
Connecting a headset disconnects
the handset's earpiece and micro-
phone.
VOLUME or on the handset
also controls the headset's volume.
43-728.fm Page 21 Thursday, August 26, 1999 8:53 AM