Adjusting the TAD’S Volume | 19 |
Deleting Messages | 19 |
Setting the Remote Operation Pin | 19 |
Remote Operation | 20 |
Using the | 20 |
Using Remote Commands | 20 |
Remote Commands | 21 |
Troubleshooting | 22 |
Care | 23 |
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
| CAUTION | ! |
| RISK OF ELECTRIC SHOCK. | |
| DO NOT OPEN. |
|
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO
This symbol is intended to alert you to the presence of uninsu- lated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to con- stitute a risk of electric shock. Do not open the product’s case.
This symbol is intended to inform you that important operating and ! maintenance instructions are included in the literature accom-
panying this product.
This phone has been tested and found to comply with all applicable UL and FCC stan- dards.
IMPORTANT SAFETY
INSTRUCTIONS
When using your telephone equipment, ba- sic safety precautions should always be fol- lowed to reduce the risk of fire, electric shock and injury to persons, including the following:
1.Read and understand all instructions.
2.Follow all warnings and instructions marked on the product.
3.Never install telephone wiring during a lightning storm.
4.Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
5.Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the net- work interface.
6.Use caution when installing or modifying telephone lines.
7.Do not affix the AC power supply cord to building surfaces with metal fittings (if the product has an AC power cord).
8.Unplug this product from the wall outlet before cleaning. Do not use liquid clean- ers or aerosol cleaners. Use a damp cloth for cleaning.
3
