Problem | Suggestion | |
|
| |
|
| |
The handset stops working or | If the base loses power while the handset is away, the security | |
works poorly during a call (contin- | ||
ued). | then place the handset back on the base. The CHARGE/IN USE | |
| indicator lights, indicating that the code is set again. | |
|
| |
| Check the charging contacts on the handset and base. If they are | |
| dirty, clean them with a pencil eraser. | |
|
| |
The TAD does not answer calls. | Make sure the TAD is turned on. | |
|
| |
| Make sure the AC adapter is properly connected. | |
|
| |
| Check all phone line connections. | |
|
| |
The TAD does not record callers’ | REC TIME is set to ANN (announcement only). Set it to 1 or 4. | |
messages. |
| |
Delete messages if memory is full. | ||
| ||
|
|
If you still have problems, disconnect the TAD. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take your phone to your local RadioShack store for assistance.
CARE
To enjoy your phone for a long time:
•Keep the phone dry. If it gets wet, wipe it dry immediately.
•Use and store the phone only in normal temperature environments.
•Handle the phone gently and carefully. Do not drop it.
•Keep the phone away from dust and dirt.
•Wipe the phone with a damp cloth occa- sionally to keep it looking new.
Modifying or tampering with the phone’s in- ternal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. If your phone is not performing as it should, take it to your local RadioShack store for assis- tance. If the trouble is affecting the telephone lines, the phone company can ask you to dis- connect your phone until you have resolved the problem.
Troubleshooting | 23 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
