Radio Shack TRC-442 owner manual Replacing The Fuse

21-1586.fm Page 18 Thursday, August 5, 1999 9:50 AM

REPLACING THE FUSE

The TRC-442’s 2-amp in-line fuse helps protect your CB from power surges and short circuits. If the CB los- es power because the fuse has burned out, replace it using a 2-amp, slow- blow glass fuse, such as Cat. No. 270- 1023.

Caution: Make sure you replace the fuse only with another fuse of the same type and rating.

Follow these steps to replace the fuse.

1.Make sure the power source and CB are both off.

2.Holding the fuse holder by both ends, push the ends together, twist one end counterclockwise, then pull them apart.

3.If the fuse is blown, replace it.

4.To close the fuse holder, align the tabs and slots at the ends, and push the fuse holder ends together. Then turn either end clockwise.

18