Radio Shack TRC-442 owner manual Cautions

21-1586.fm Page 6 Thursday, August 5, 1999 9:50 AM

Cautions:

•If you use the TRC-442 in a vehi- cle, mount it securely to avoid damage to the CB or vehicle or in- jury to anyone in the vehicle dur- ing sudden starts or stops.

•Do not mount the CB where it could damage or interfere with the proper operation of any passive restraint safety device (an air bag or seat belt).

Follow these steps to mount the CB using the supplied hardware.

1.Using the mounting bracket as a template, mark the positions for the screw holes on the mounting surface.

2.In each marked location, drill a hole slightly smaller than the sup- plied mounting bolts.

Caution: Be careful not to drill into objects behind the mounting surface.

6

3.Attach the bracket to the mounting surface with the supplied mount- ing bolts, lockwashers, washers, and nuts.

Note: If you cannot reach behind the mounting surface to attach the nuts on the bolts, use the supplied screws, lockwashers, and wash- ers to secure the bracket.

4.Attach the CB to the mounting bracket using the supplied rubber washers and mounting knobs.

Rubber Washer