4.If necessary, turn RF.GAIN clock- wise to increase the signal sensi- tivity.
(illus)
To turn off the
(illus)
TRANSMITTING
We recommend you spend some time receiving transmissions before you try to transmit a message yourself.
Follow these steps to transmit.
1.Set the mode selector to CB.
2.Slide CH9/OUT to OUT.
3.Turn CHANNEL to the desired channel.
12
4.Hold the microphone 2 or 3 inches from your mouth, then press and hold down the microphone talk button and speak into the micro- phone in a normal voice. The red TX indicator lights.
(illus)
Note: Do not speak too loudly when transmitting. It does not make your signal any stronger, and might distort your transmis- sion.
5.When you finish transmitting, release the microphone talk but- ton. You can now receive trans- missions.
6.To turn off the
